Conergy SunTop
Conergy SunTop is the system of choice for mounting on pitched roofs, which is achieved with ease; the system requires no customisation, is quick to fit and compatible with different module types. Conergy SunTop makes many things possible – it can be used universally and on any type of roofing. The technology behind this allows the rail length to be adjusted thanks to innovative telescopic sections, thus avoiding the need for custom-cutting. Connectors enable the use of short rails, and module installation is as fast as lightning, with the QuickStone module fasteners.
Quick and easy installation:
- Time savings from the high level of pre-assembled components
- Time savings thanks to an extremely accurate design without requiring custom-cutting
- Only a single tool is necessary to fit the Conergy SunTop to the roof
- Patented QuickStone technology
- Easy to access all components and connections
Maximum flexibility:
- Fits on any type of roofing with a roof pitch of up to 60°
- Compatible with virtually all module types and installation orientations
Maximum safety:
- Use of high-quality materials
- High corrosion resistance ensures maximum service life
- Individual stability and structural analyses in accordance with local regulations and standards
NEW: Conergy SunTop Trapez
 | Trapezoidal roofs form an ideal base for photovoltaic systems. No other kind of roof allows solar modules to be installed so simply and cost-effectively. The Conergy SunTop Trapez mounting system has been specifically developed for use on this type of roofs. Intelligent brackets are mounted to the sides so that the trapezoidal sheeting can bear greater loads, and uneven roof sections can be levelled out. |
By hooking on the brackets, the support rails can be easily fitted in place. Thanks to fewer pre-assembled components, this system can be fitted more quickly and more economically.
Maximum flexibility:
- Suitable for trapezoidal roofs with a bead height in excess of 20 mm*
- Lateral attachment of the trapezoidal bracket to the raised bead, increasing load capacity and making it better for use on critical roofs
- For frameless and framed modules
Rapid and secure installation:
- Minimal material and tool requirements
- Time savings from the high level of preassembly
- Rail profiles attached by merely inserting and twisting the bracket in the rail
- Depending on the roof covering, it is not necessary to use every raised bead to attach the frame
- Height-adjustment mechanism to compensate for unevenness in the roof of up to 15 mm
Maximum safety:
- Use of corrosion-resistant materials for maximum service life
- Individual structural analyses supplied by Conergy software
* If the height of the raised bead is less than 20 mm, alternatively a bracket can be used which is screwed into the trapezoidal sheeting from above.